Horner APG SmartStack I/O HE-DIQ712 - Manual

MAN0316-08 10 NOV 2006 PAGE 1
DIQ712
Information is subject to change without notice. SmartStack is a trademark of Horner APG, LLC.
This datasheet also covers products starting with IC300.
1 SPECIFICATIONS
INPUT DIQ712 DIQ712
Inputs per Module 14 Minimum ON Current 1 mA
Commons per
Module
3 Maximum OFF Current 200 µA
Input Voltage Range 12/24 VDC OFF to ON Response 1 ms.
Peak Voltage 35 VDC Max. ON to OFF Response 1 ms.
ON Voltage level Min. 9 VDC
OFF Voltage level Max. 3 VDC
Input Impedance > 10 KΩ
Isolation
(Channel to Ground)
500 VDC
OUTPUT DIQ712 DIQ712
Outputs per Module 10 relay Maximum Inrush Current 3 A
Commons per
Module
2 Minimum Load None
Output Type Relay OFF to ON Response 6 ms. Typical
Coil Voltage 18–30 VDC ON to OFF Response .3 ms. Typical
Contact Voltage
250 VAC / 30 VDC Max.
Isolation (Common to
Common and Common
to Bus)
2500 VDC
ON Voltage drop 0.2 V Max.
Maximum Leakage
Current
5 µA
Maximum Load
current (resistive) per
output
3 A
See Derating Chart
General Specifications
Required Power
(Steady State)
0.19 W(8 mA @ 24 VDC)
Operating
Temperature 0 °–60° Celsius
Required Power (Inrush) Negligible Terminal Type Spring Clamp, Removable
Relative Humidity 5–95% Non-condensing Weight 9.5 oz. (256 g)
CE
UL
See Compliance Table at http://www.heapg.com/Support/compliance.htm
Mixed I/O Module
HE800DIQ712 / HE-DIQ712*
12/24 Vdc In, Positive/Negative Logic
3A Relay Out
* HE- Denotes plastic case.