Horner APG SmartStack I/O HE-MIX902* User Manual
1 specifications

MAN0292-08
10 NOV 2006
PAGE 1
MIX902
This Data Sheet is published individually & also as a part of the SmartStack Supplement (SUP0246-05).
Information is subject to change without notice. SmartStack is a trademark of Horner APG, LLC.
This datasheet also covers products starting with IC300.
1 SPECIFICATIONS
ANALOG INPUT
MIX902
MIX902
Number of Channels
4
Analog
Inputs
Input Points Required
4
Input Ranges
(including
over-range)
Nominal: 0-20.47mA
Conversion Time
(PLC Update Rate)
Set by PLC Scan Time
Resolution 12-Bits
Converter Type
Successive
Approximation
Input Impedance
200 Ohms < 12VDC,
Clamped @ 12VDC,
35mA Max. Continuous
Additional error for
temperatures other than
25
°C
0.01% /
°C
Maximum Error at
25
°C
0.1%
Maximum Over-Current
35mA
DIGITAL INPUT
Inputs per Module
8
Input
Characteristics
Bidirectional
Commons per
Module
1
Input Impedance
10K Ohms
Input Voltage Range
12-24VDC
Minimum ON Current
1mA
Peak Voltage
35VDC Max.
Maximum OFF Current
200
µA
Isolation
(Channel to Channel
and Channel to
Common)
500VDC
OFF to ON Response
1ms.
ON Voltage Level
9VDC
OFF Voltage Level
3VDC
ON to OFF Response
1ms.
ANALOG OUTPUT
Number of Channels
2
Analog
Outputs;
Output Points Required
2
Output Ranges
(including over-
range)
20.47mA;
Clamped @-0.5 - +33VDC
Nominal
Additional error for
temperatures other than
25
°C
0.01% /
°C
Resolution 12
Bits
Output Voltage
4 - 30VDC
Maximum Error at 25
°C
0.1%
(Note: Used 2% error
under EMC testing.)
DIGITAL OUTPUT
MIX902
MIX902
Outputs per Module
8
Maximum Inrush Current
650mA
Commons per
Module
1
Minimum
Load
None
Operating Voltage
10 - 28VDC
OFF to ON Response
1ms.
Output Type
Sourcing / 10K Pull-Down
ON to OFF Response
1ms.
Peak Voltage
28VDC Max.
Output Characteristics
Current Sourcing
24VDC Bipolar Digital In
10-28VDC, 0.5A Sourcing Digital Out
4-20mA Analog In/Out
HE800MIX902 / HE-MIX902*
* HE- denotes plastic case.