Horner APG SmartStack I/O HE800PBS600/HEPBS600 - Manual (Page 44)

DP Slave
MAN0575-04-EN
PAGE 44 of 97
© Horner APG.This drawing is the property of Horner APG. And shall not be disclosed or reproduced except as specifically authorised.
Profibus Modules User Manual
EO 09-0009
7.2 Parameter
Data
The Parameter Data can be edited in the Settings > Parameter Data menu. If default parameters
are configured in the GSD file of the Slave, then these are automatically inserted when the menu is
opened for the first time. Some of the DP Slave devices require further Parameter data, for instance
in order to change a measuring limit or a value range. This type of data is Slave specific and their
functionality cannot be described here. The window below gives an example of parameter data of a
Slave.
Figure 20: Parameter Data (Hexadecimal depiction)
A modular PROFIBUS-DP Slave station could require parameter data for one or more modules and
for the Slave station itself (main station). There are three options:
Parameter data - These are all the parameters of a Slave station.
Common - Parameter Data of the main station.
Module - Parameter Data for one of the modules.
After the choice of the text button, the following window with the text parameter data appears. These
parameters are for the main station:
Example for parameter data:
Figure 21: Parameter Data (Text depiction)