Horner APG SmartStack I/O HE-DIQ716 - Manual

MAN0268-09 10 NOV 2006 PAGE 1
DIQ716
Information is subject to change without notice. SmartStack is a trademark of Horner APG, LLC.
This datasheet also covers products starting with IC300.
1 SPECIFICATIONS
INPUT DIQ716 DIQ716
Inputs per Module 16 Input Characteristics Bidirectional
Commons per
Module
3 Input Impedance 10 KΩ Ohms
Input Voltage Range 12–24 VDC
Minimum ON Current 1 mA
Peak Voltage 35 VDC Max. Maximum OFF Current 200 µA
Isolation
(Channel to Ground)
500 VDC OFF to ON Response 1 ms.
ON Voltage Level 9 VDC /1 mA minimum ON to OFF Response 1 ms.
OFF Voltage Level 3 VDC
OUTPUT DIQ716 DIQ716
Outputs per Module 12 Maximum Inrush Current 650 mA
Commons per Module 1 Minimum Load None
Operating Voltage 10–28 VDC OFF to ON Response 1 ms.
Output Type Sourcing / 10 K Pull-Down ON to OFF Response 1 ms.
Peak Voltage 28 VDC Max. Output Characteristics Current Sourcing
Maximum Load Current
per channel
0.5 A Max. Output Protection Short Circuit
General Specifications
Required Power
(Steady State)
0.13 W (5.5 mA @ 24 VDC)
Operating
Temperature
0 °–60° Celsius
Required Power (Inrush) Negligible Terminal Type Spring Clamp, Removable
Relative Humidity 5–95% Non-condensing Weight 9 oz. (256 g)
CE See Compliance Table at http://www.heapg.com/Support/compliance.htm
UL Operating Temperature Code T4;
See Compliance Table at
http://www.heapg.com/Support/compliance.htm
Mixed DC I/O Module
HE800DIQ716 / HE-DIQ716*
12/24 Vdc In, Positive/Negative Logic
(16 Input Channels)
10–28 Vdc Out, Positive Logic
(12 Output Channels)
* HE- denotes plastic case.