HP StorageWorks 2.140 Director Switch - Manual (Page 63)

Director Element Manager user guide 63
• Clicking a port, port row, or port bar graph in the preceding views and choosing Port Properties
from the secondary Port menu in the Product menu on the menu bar.
Figure 22 Port Properties dialog box
The Port Properties dialog box provides the following information in each of the listed fields:
• Port Number—The physical port number.
• Port Name—User-defined port name or description. See ” Configuring ports ” on page 119 for
instructions.
• Type—Displayed the port type, as follows:
• G_Port—Displayed if nothing is logged into the port or the port is configured to be a G_Port.
• F_Port—Displayed if a device is logged into the port or the port is configured to be an
F_Port.
• E_Port—Displayed if the port is connected to another switch’s E_Port through an ISL or the
port is configured to be an E_Port.
• FL_Port—Displayed if a loop device is logged into the port.
• FX_Port—Displayed if the port is configured to be an FX_Port.
• GX_Port— Displayed if the port is configured to be a GX_Port.
• Operating speed—Displayed the current data speed for the port as 1 Gig, 2 Gig, or Not
Established. is displayed if Negotiate has been set for the port through the Configure Ports
dialog box and the data speed has not been resolved between the port and the attached
device, or if the port and device are not communicating.
• Fibre Channel Address—The switch’s Fibre Channel address.
• Port WWN—The port’s 16-digit World Wide Name (WWN).