HP StorageWorks 2.140 Director Switch - Manual (Page 129)

Director Element Manager user guide 129
• Block all ports—Blocks communication between all ports. Ports that are blocked continuously
transmit off line sequences (OLS).
• Unblock all ports—Unblocks all port addresses that are currently blocked. This allows
communication from all port addresses in the switch.
• Clear all—Clears the prohibit and blocked status of all port addresses in the switch.
• CUP Name—This user-defined name is assigned to the CUP. Up to 24 alphanumeric characters
are allowed, including spaces, hyphens, and underscores. A space is not allowed as the first
character, and the characters are case-sensitive. This is not a required field.
• Activate—Click to activate the current configuration. A warning is displayed before the action
occurs.
• Save As—Click to save the current configuration with a name and description. The saved
configuration will be stored on the HAFM appliance and in the Address Configuration Library.
See ” Managing stored address configurations (FICON Management Style) ” on page 130” for
information on accessing this library.
• Cancel—Click to cancel the configuration settings and close the dialog box without saving. If
you click this button after you click Save As, your changes will be saved and the dialog box will
simply close.
To configure, save, and activate port addresses:
1. Select Configure > Addresses on the menu bar, then click Active.
The Configure Addresses–“Active” dialog box is displayed.
Figure 50 Configure Addresses–“Active” dialog box
2. Enter information into the appropriate fields.
3. Click the squares to either prohibit or allow connections.