HP StorageWorks 2.140 Director Switch - Manual (Page 40)

Element Manager Overview 40
In this expanded view of the port card, you can:
• Determine the port card status by viewing the amber LED at the top of the card. Identify the
port’s FRU name, position, operating state, beaconing state, and part number from the table
shown in this view.
• Determine port status and operation by the status symbols that display next to the port
connectors and simulated LED indicators above the connectors.
• Right-click the port card to display a pop-up menu with these options: Block All Ports, Unblock
All Ports, and Diagnostics.
• Right-click the port connector to display a menu with these options: Port Properties, Node
Properties, Port Technology, Block Port, Enable Beaconing, Diagnostics, Swap Ports, Clear Link
Incident Alert(s), Reset Port, Port Binding, and Clear Threshold Alert(s).
These options also display when you click a port connector and select Product > Port.
• Double-click a port connector to display the Port Properties dialog box.
• Return to the Hardware view by clicking Back to Full View.
See ” Port Card view ” on page 61 for detailed information on this view.
Port List view
To display the Port List view, click the Port List view tab. A table similar to the one shown in Figure 8
is displayed in the View panel. This table includes the port number, port name, port address
(FICON Management Style only), the block/unblock configuration, operating state and port type of
the selected port.
Figure 8 Port List view