HP StorageWorks 2.140 Director Switch - Manual (Page 131)

Director Element Manager user guide 131
• Click Copy to copy a stored configuration. When the Copy Address Configuration dialog
box is displayed, provide a name and description for the configuration.
• Names must be between 1 and 8 characters in length. Valid characters are uppercase A–Z,
0–9, hyphen (-), and underscore (_). The name may not be CON, AUX, COMn (where
n=1-9), LPTn (where n=1-9), NUL, or PRN. Descriptions must be between 0 and 24
characters in length. Up to 24 alphanumeric characters are allowed, including spaces,
hyphens, and underscores. Click OK and the configuration is added to the library.
• Click Activate to activate a stored configuration and send it to the switch for immediate use.
A warning is displayed before the action occurs.
NOTE: If Active=Saved is enabled through the Configure FICON Management Server
dialog box, this overwrites the current IPL address configuration.
3. Click Close to close the dialog box when you are finished managing the library.
Configuring Allow/Prohibit Matrix
The Allow/Prohibit option displays two options, Active and Stored that both display a Configure
Allow/Prohibit Matrix window that lets you interact with the element manager while the window is
open. You can also minimize, maximize, and close the window from the title bar. This window can
be open continuously and updates automatically.
Accessing Active Configurations
To access active configuration, do the following: