HP StorageWorks 2.140 Director Switch - Manual (Page 229)

Director Element Manager user guide 229
Invalid value for day
(1-31).
At the Configure Date and Time
dialog box, the DD value (day)
must be an integer from 1 through
31 inclusive.
Verify and enter a valid date.
Invalid value for
E_D_TOV.
At the Configure Fabric
Parameters dialog box, the error
detect time-out value (E_D_TOV)
must be an integer from 2 through
600 inclusive.
Verify and enter a valid number.
Invalid value for hour
(0-23).
At the Configure Date and Time
dialog box, the HH value (hour)
must be an integer from 0 through
23 inclusive.
Verify and enter a valid time.
Invalid value for
minute (0-59).
At the Configure Date and Time
dialog box, the MM value
(minute) must be an integer from 0
through 59 inclusive.
Verify and enter a valid time.
Invalid value for
month (1-12).
At the Configure Date and Time
dialog box, the MM value (month)
must be an integer from 1 through
12 inclusive.
Verify and enter a valid date.
Invalid value for
R_A_TOV.
At the Configure Fabric
Parameters dialog box, the
resource allocation time-out value
(R_A_TOV) must be an integer
from 10 through 1200 inclusive.
Verify and enter a valid number.
Invalid value for
second (0-59).
At the Configure Date and Time
dialog box, the SS value (second)
must be an integer from 0 through
59 inclusive.
Verify and enter a valid time.
Invalid value for
threshold (1-99)%.
Value entered for each port in the
Configure Open Trunking dialog
box must be in the range from 1 to
99. This message is displayed only
if the optional Open Trunking
feature is installed.
Enter a number from 1 to 99 into the
Threshold % column of the Configure
Open Trunking dialog box.
Table 12 Element Manager messages (continued)
Message Description Action