Open trunking log, Security log, Figure 73 security log – HP StorageWorks 2.140 Director Switch User Manual
Page 158: 73 security log
Using logs
158
•
Name—Name for the alert as configured through the Configure Threshold Alerts dialog box.
•
Port—Port number where the alert occurred.
•
Type—The type of alert: transmit (Tx) or receive (Rx).
•
Utilization %—Percent usage of traffic capacity. This is the percent of the port’s throughput
capacity achieved by the measured throughput. This setting constitutes the threshold value and is
configured through the Configure Threshold Alerts dialog box. For example, a value of 25
means that threshold occurs when throughput reaches 25 percent of the port’s capacity.
•
Alert Time—The time that the utilization % must exist before an alert is generated. This is set
through the Configure Threshold Alerts dialog box.
•
Interval—The time interval during which the throughput is measured and an alert can be
generated. This is set through the Configure Threshold Alerts dialog box.
Open Trunking Log
This log displays only if the optional Open Trunking feature is installed. For details, see ”
Security Log
The Security Log includes information about security events.
Figure 73
Security log
Each Security Log entry contains the following information:
•
Severity—The severity level of the event: Informational, Warning, and Fatal.
•
User—The user who is associated with the event.
•
Reason—The reason code for the cause of the failure.
•
Description—The security event category plus a descriptive listing that lists more details of the
event and the IP address of the product.