Menu bar, Product menu – HP StorageWorks 2.140 Director Switch User Manual
Page 28
Element Manager Overview
28
Menu bar
The menu bar on the Element Manager window includes the following menus:
Click the name of a menu to display a list of menu options. Click an option to open a dialog box
that allows you to perform configuration and maintenance tasks and to view logs.
If a menu option contains a check box, click the box to add a check mark and enable a function.
Click a check box containing a check mark to remove the check mark and disable the function.
Product menu
Select the Product menu to display the following options.
•
Management style—Provides a secondary menu with option buttons for Open Systems and
FICON management styles. These options change some Element Manager dialog boxes and
options to allow management of the director in Open Systems or FICON environments.
• Open Systems—Click this option button for (non-FICON) Fibre channel environments. Open
Systems is the default management style.
• FICON—Click this option button when attaching an IBM S/390 Parallel Enterprise or zSeries
server to the director and implementing in-band director management through a Fibre
Connection (FICON) channel. If the director firmware level is earlier than 6.0 and the
FICON Management Server feature is enabled, the default management style will be
FICON. The management style can be changed to Open Systems with the FICON
Management Server feature enabled.
NOTE:
If firmware versions earlier than 6.0 are installed on the director, you need to take the
director off line before changing the management style.
•
Port Name Display—Allows you to view ports by WWN or by nicknames.
•
Port—Provides a secondary port menu only when the Port Card view, Port List view, or
Performance view is displayed in the View panel. To use this menu for a specific port, click a
port in the Port Card view, a port’s row in the Port List view, or a port’s bar graph in the
Performance view.
The menu contains options that are identical to those that display when you right-click a port,
port row, or port bar graph in those views. For details on these options, see ”
•
FRU—Click a serial crossbar (SBAR) card, control processor (CTP) card, port card, power
supply module, or cooling fan module in the Hardware view only and then select Product > FRU
to display a menu of options for the selected FRU. These options are the same menu options that