HP StorageWorks 2.140 Director Switch - Manual (Page 136)

Configuring the director 136
Configuring the FICON Management Server
For complete procedures on configuring this optional feature, see ” Configuring the FICON
Management Server ” on page 184.
Configuring the Open Systems Management Server
For complete procedures on configuring this optional feature, see ” Configuring the Open Systems
Management Server ” on page 186.
Configuring the feature key
Feature keys verify ownership of the Element Manager and optional features that can be purchased
for the Element Manager. The feature key, which is encoded with a director’s serial number, can
only be configured on the director to which it is assigned.
A feature key is a string of alphanumeric characters consisting of both uppercase and lowercase.
The following is an example of a feature key format: XxXx-XXxX-xxXX-xX.
NOTE: The total number of characters may vary. The key is case sensitive and it must be entered
exactly, including the dashes.
You can enable the feature key with the director on line. However, if a current feature is disabled by
activating a new feature key, you must take the director off line before enabling the new feature key.
Display the Configure Feature Key dialog box by choosing Configure > Features.
FICON Management Server Feature: If you are enabling the FICON Management Server feature,
the management style automatically configures to FICON Management Style. You cannot change
the management style to Open Systems management style while the FICON Management Server
feature is enabled.
To configure a feature key:
1. Select Configure > Features.
The Configure Feature Key dialog box is displayed, as shown in Figure 55 .
Figure 55 Configure Feature Key dialog box