HP StorageWorks 2.140 Director Switch - Manual (Page 152)

Using logs 152
Audit Log
The Audit Log displays a history of all configuration changes applied to the director from any
source, such as HAFM, SNMP management stations, or host.
Figure 68 Audit log
Some actions, such as backing up configuration data and enabling automatic date/time
synchronization, are performed only by the HAFM appliance without director interaction. These
actions are indicated when HAFM displays in the Source column, as shown in Figure 68 . If
HAFM does not display, the time stamp is from the director.
Each Audit Log entry includes the following information:
• Date/Time—The date and time of the change on the director.
• Action—Describes the user action that caused the configuration change, such as off line status,
port name change, or change of address.
• Source—Identifies the user who is making the change through the director Element Manager
and the IP or DNS host name address of the remote user’s workstation.
• Application Interface—Change was made by an Element Manager user.
• HAFM Basic—Change was made by a user through the HAFM Basic interface.
• Fabric—Change was initiated by another switch in the fabric that is not managed by this
HAFM appliance.
• Fibre Channel Host—Change was made in-band by a Fibre Channel host through the Open
Systems Management Server.
• Maintenance Port—Change was made by a user connected to the maintenance port.
• SNMP—Change was made by a remote SNMP management station.
• Telnet—Change was made through a telnet connection by the Command Line Interface.