HP MPX200 Multifunction Router - Manual (Page 82)

5. Set up Discovery Addressing for the software initiator:
a.
Repeat Step 4 to open the iSCSI initiator Properties dialog box.
b. Click the Dynamic Discovery tab.
c. Click Add to add a new iSCSI target.
The Add Send Target Server dialog box is displayed. See “Add Send Target Server dialog
box” (page 82) .
d. Enter the iSCSI IP address of the MPX200.
e. Click OK.
Figure 78 Add Send Target Server dialog box
82 MPX200 iSCSI configuration rules and guidelines