HP MPX200 Multifunction Router - Manual (Page 157)

Beacon
Enables or disables the flashing of the blue beacon LED.
None Authority
on
off beacon Syntax
Turns on the flashing beacon. on Keywords
Turns off the flashing beacon. off
Example: The following example shows how to turn the flashing beacon on:
MPX200 <1>#> beacon on
Blade
Allows you to select the blade to be managed. This command is valid only at the chassis CLI
prompt. The chassis CLI prompt does not include the blade number (for example, MPX200 #>),
whereas the blade CLI prompt includes the blade number (for example, MPX200 <1> #>).
None Authority
[1 or 2] blade Syntax
Example: The following example shows blade 2 being selected at the chassis prompt, followed
by the quit command at the blade prompt, which returns control to the chassis prompt:
MPX200 #> blade 2
MPX200 <2> #> quit
MPX200 #>
Clear
Removes all entries (events) from the router log file or resets the FC and iSCSI statistics counters.
Admin session Authority
logs
stats clear Syntax
Clears all entries from the router’s log file. logs Keywords
Resets the statistics counters. stats
Examples: The following examples show the clear commands:
MPX200 <1>(admin) #> clear logs
MPX200 <1>(admin) #> clear stats
Date
Displays or sets the date and time. To set the date and time, enter the information in the format
MMDDhhmmCCYY (numeric representation of month-date-hour-minute-century-year). The new date
Commands 157