HP MPX200 Multifunction Router - Manual (Page 236)

Table 36 WD log messages (continued)
Unable to change IPV4 setting back to
original. Error User WD: Unable to resotre GE2 Network IPV4
params
Unable to change IPV6 setting back to
original. Error User WD: Unable to resotre GE2 Network IPV6
params
Error occurred while changing FCIP port
property. Error User WD: Unable to set FCIP parameters on
GE2
Error while shutting down interface. Error User WD: Error Unable to do interface GE2
down
Error while configuring IP address for
Wanlink Testing. Error User WD: Error Unable to do
WanLinkTestConfigureIP:xx
Unable to fetch iSCSI parameters. Error User WD: Unable to get iSCSI parameters GE2
xx
Unable to store iSCSI parameters. Error User WD: Unable to set iSCSI parameters on
GE2
Path MTU client is not able to set
required property of the socket. Error User WD: Unable to set properies of PMTU
request connection
Path MTU Server configuration failure. Error User WD: unable to configure (err 2) PMTU
Thread
Path MTU server failed to bind to the
socket. Error User WD: Unable to bind PMTU server socket
Path MTU server failed to start listing
socket. Error User WD: PMTU Listen Failed
Path MTU calculation failed; insufficient
resources. Error User WD: Unable to perform PMTU calculation,
error code xx
Path MTU calculation failed, insufficient
resources. Error User WD: Unable to perform PMTU calculation,
no memory
Unable to connect to PMTU server
running on Wanlink Test Sever. Error User WD: client to pmtu server Connect
failed:xx
Wanlink Test Calculation has not
started. Error User WD: unable to begin Wan Link Test
Calcuation procedure
Wanlink Calcuation did not finish
within expected time. Error User WD: wanlink Time expired
Error occurred while fetching the RTT &
Jitter calculation result. Error User WD: Error getting RTT and Jitter
Error occurred while fetching the UDP
Bandwidth & MTU calculation result. Error User WD: Error getting UDP MTU & Bandwidth
Error occurred while fetching the Packet
Drop calculation result. Error User WD: Error getting Packet Drop
Error occurred while fetching the TCP
Bandwidth calculation result. Error User WD: Error getting TCP Bandwidth
Ping test failed. Error User WD: Destination IP address and Port not
reachable.
Unable to report Wanlink test results. Error User WD: Error opening offline stats file
User provided invalid parameter. Error User WD: wanlinktest setup failed, Invalid
parameter received.
236 Log messages