HP MPX200 Multifunction Router - Manual (Page 71)

c. Select a target from the Discovered Targets list and then click Add ( Figure 65 (page 71) ).
Figure 65 Discovered Targets list
NOTE: The mpx iSCSI port may present several iSCSI targets to the Xtend SAN iSCSI
Initiator. Select only one target from the list.
d. For ISNS discovery
Select Initiator and then enter the iSNS name or IP address in the box ( Figure 66 (page
71) ).
Figure 66 iSNS discovery and verification
Setting up the iSCSI initiator 71