HP MPX200 Multifunction Router - Manual (Page 205)

qsrIsInitAlias
SnmpAdminString Syntax
Read-only Access
Alias for the iSCSI initiator. Description
qsrIsInitAddressType
InetAddressType Syntax
Read-only Access
Type of iSCSI initiator’s IP address (IPv4 or IPv6). Description
qsrIsInitAddress
InetAddress Syntax
Read-only Access
IP address of the iSCSI initiator. Description
qsrIsInitStatus
Integer:
1 = unknown, Syntax
2 = loggedIn,
3 = loggedOut,
4 = recovery
Read-only Access
Status of the iSCSI initiator, that is, whether or not it is logged in to the router. Description
qsrIsInitOsType
SnmpAdminString Syntax
Read-only Access
The type of the iSCSI initiator's operating system. Description
qsrIsInitChapEnabled
Integer: 0 = enabled; 2 = disabled Syntax
Read-only Access
A value indicating whether CHAP is enabled or not for this iSCSI initiator. Description
LUN table
These tables contain information about the LUN list.
qsrLunTable
SEQUENCE OF QsrLunEntry Syntax
Management Information Base 205