HP MPX200 Multifunction Router - Manual (Page 162)

show chap
show chassis
show fc []
show features
show initiators [fc | iscsi]
show initiators_lunmask
show iscsi []
show isns
show logs []
show luninfo
show luns
show lunmask
show memory
show mgmt
show ntp
show perf [byte | init_rbyte | init_wbyte |tgt_rbyte | rgt_wbyte]
show presented_targets [fc|iscsi]
show properties]
show snmp
show stats
show system
show targets [fc | iscsi]
show vpgroups [vpgroup index]
shutdown
target [add | rm]
traceroute
History
Displays a numbered list of the previously entered commands.
None Authority
history Syntax
Example:
MPX200 <1> (admin) #> history
1: admin start
2: help
3: history
MPX200 <1> (admin) #>
Image
Updates the router’s firmware image and cleans up (removes) the image files in the router’s /var/
ftp
directory.
Admin session Authority
cleanup
list [file]
unpack [file] image Syntax
Removes all firmware image files in the router’s /var/ftp
directory. These are files transferred by the user when updating
the router’s firmware image. cleanup Keywords
Displays a list of the firmware image files in the router’s /var/
ftp
directory.
list
[file]
Unpacks the firmware image file specified in the [file]
parameter, and then installs the firmware image on the router. unpack
[file]
Before using this command, you must use FTP to transfer the
162 Command reference