HP MPX200 Multifunction Router - Manual (Page 176)

press 'q' or 'Q' and the ENTER key to do so.
Configuring VpGroup: 1
-------------------------
Status (0=Enable, 1=Disable) [Enabled ]
VpGroup Name (Max = 64 characters) [VPGROUP_1 ]
All attribute values for VpGroup 1 that have been changed will now be saved.
Configuring VpGroup: 2
-------------------------
Status (0=Enable, 1=Disable) [Disabled ] 0
VpGroup Name (Max = 64 characters) [VPGROUP_2 ]
All attribute values for VpGroup 2 that have been changed will now be saved.
Configuring VpGroup: 3
-------------------------
Status (0=Enable, 1=Disable) [Disabled ] 0
VpGroup Name (Max = 64 characters) [VPGROUP_3 ]
All attribute values for VpGroup 3 that have been changed will now be saved.
Configuring VpGroup: 4
-------------------------
Status (0=Enable, 1=Disable) [Disabled ]
All attribute values for VpGroup 4 that have been changed will now be saved.
Show
Displays operational information for the blade.
None Authority
chap
chassis show Syntax
fc [port_num]
features
initiators [fc or iscsi]
initiators_lunmask
iscsi [port_num]
isns [port_num]
logs [last_x_entries]
luninfo
lunmask
luns
memory
mgmt
ntp
perf [ byte | init_rbyte
| init_wbyte
| tgt_rbyte
| tgt_wbyte ]
presented_targets [fc or iscsi]
properties
snmp
stats
system
targets [fc or iscsi]
vpgroups [vpgroup index]
Displays configured CHAP iSCSI nodes. See “show
CHAP command” (page 178) .
chap Keywords
Displays chassis information and status. See “show
chassis command” (page 178) .
chassis
Displays FC port information. See “show FC
command” (page 179) .
fc [port_num]
Displays the current settings for a particular FCIP route
or for all FCIP routes. See
“show fciproutes
command” (page 179) .
fciproutes []
176 Command reference