HP MPX200 Multifunction Router - Manual (Page 81)

Figure 76 Firewall Properties dialog box
4. Enable the iSCSI software initiators:
a.
In the VMware VI client, select the server from the inventory panel.
b. Click the Configuration tab, and then click Storage Adapters under Hardware.
c. Under iSCSI Software Adapter, choose the available software initiator.
d. Click the Properties link of the software adapter.
The iSCSI Initiator Properties dialog box is displayed.
e. Click Configure.
The General Properties dialog box is displayed. See “General Properties dialog box”
(page 81) .
f. Select the Enabled check box.
g. Click OK.
Figure 77 General Properties dialog box
Setting up the iSCSI initiator 81