HP MPX200 Multifunction Router User Manual

Page 168

The save logs command creates a tar file that contains the
router’s log data, storing the file in the router’s /var/ftp

logs

directory. When the command has finished executing, you must
FTP the log’s tar file from the blade.

The save traces command creates a tar file that contains the
router’s dump data, storing the file in the router’s /var/ftp

traces

directory. When the command has finished executing, you must
FTP the trace’s tar file from the blade. The system notifies you if
the router does not have any dump data. Each time it generates
dump data, the system adds an event log entry.

Example 1:

MPX200 <1>(admin) #> save capture
Debug capture completed. Package is System_Capture.tar.gz
Please use FTP to extract the file out from the System.

Example 2:

MPX200 <1>(admin) #> save logs
Save Event Logs completed. Package is Router_Evl.tar.gz
Please use FTP to extract the file out from the System.

Example 3:

MPX200 <1>(admin) #> save traces
Save ASIC Traces completed. Package is Router_Asic_Trace.tar.gz
Please use FTP to extract the file out from the System.

Set

Configures general router parameters, as well as parameters for the FC, iSCSI, and management
ports.

Admin session

Authority

alias
chap

set

Syntax

chassis
fc []
features
iscsi []
isns
mgmt
ntp
properties
snmp [trap_destinations []]
system
vpgroups [vpgroup index]

Assigns an alias name to a presented iSCSI target. See

“set alias command” (page 169)

alias

Keywords