HP MPX200 Multifunction Router - Manual (Page 62)

a. Click the P6000 EVA Storage Systems icon to start the iSCSI storage presentation.
Figure 54 Adding a host
b. Select the Hosts folder.
c. Click Add a Host to create an iSCSI initiator host.
A dialog box opens.
•
Enter a name for the initiator host in the Name box.
•
Select iSCSI as the Type.
•
Select the initiator IQN from the iSCSI node name list.
•
Select an operating system from the Operating System list.
NOTE: For Windows 2012, select the default operating system “Windows” as the
host mode in Command View, then go to the MPX200 CLI and change the host mode
of this host to “Windows 2012”.
62 MPX200 iSCSI configuration rules and guidelines