HP MPX200 Multifunction Router User Manual
Page 105
3.
Enable CHAP for the Microsoft iSCSI initiator.
a.
Select the General tab.
b.
Click Secret in the middle of the screen.
c.
Click Reset.
d.
Enter the MPX200 iSCSI Presented Target CHAP secret (for example: hpstorageworks).
e.
Click OK.
f.
Click Discovery.
•
To discover iSCSI target portals manually:
a.
Click Add under Target Portals.
b.
Enter the IP address of the iSCSI port of the MPX200.
c.
Click Advanced.
d.
Select the CHAP Login Information check box.
e.
Enter the CHAP secret for the MPX200 discovered iSCSI initiator in the Target
Secret box (for example, CHAPsecret01).
f.
Select the Mutual Authentication check box.
g.
Click OK.
h.
Click OK.
The initiator completes Target discovery
•
Using iSNS for Target discovery:
a.
Click Add under iSNS Servers.
b.
Enter the IP address of the iSNS server.
c.
Click OK.
g.
Click Targets.
h.
Select the appropriate target for login.
i.
Click Log On.
j.
Click Advanced.
k.
Select the CHAP Login Information check box.
l.
Enter the CHAP secret for the MPX200 discovered iSCSI initiator in the Target Secret box
(for example, CHAPsecret01).
m. Select the Mutual Authentication check box.
n.
Click OK.
o.
Click OK again and the initiator completes normal login.
Enabling bidirectional CHAP during discovery session and bidirectional CHAP during
normal session
lists the settings you use to enable bidirectional CHAP during a discovery
session and bidirectional CHAP during a normal session.
Table 18 CHAP bidirectional settings
Microsoft initiator secret settings
MPX200 secret settings
Setting (example)
Action
Setting (example)
Source
hpstorageworks
General Tab Secret
hpstorageworks
iSCSI Port
CHAPsecret0
Add Target Portal
CHAPsecret01
Discovered iSCSI
initiator
Setting up authentication 105