HP MPX200 Multifunction Router - Manual (Page 213)

FC target device discovery notifications are sent for the following event:
•
FC Target
◦ State: Discovered, went offline, or went online
◦ Target WWPN
◦ Blade number (1 or 2)
Target presentation (mapping)
The target presentation notification indicates that the specified target has been presented (mapped)
or unpresented (unmapped).
qsrPresTgtMapped uses the following objects:
•
qsrBladeSlot
•
qsrEventTimeStamp
•
qsrPresTgtMapped
•
qsrPresTgtUnmapped
•
qsrEventSeverity
Target presentation notifications are sent for the following event:
•
Target Presentation
◦
State: Presented (mapped) or unpresented (unmapped)
◦ Target name
◦ Blade number (1 or 2)
VP group notification
The VP group notification indicates that the specified VP group is enabled or disabled. It also
represents change in the name of the VP group.
qsrVPGroupStatusChanged uses the following objects:
•
qsrBladeSlot
•
qsrVPGroupIndex
•
qsrVPGroupStatus
•
qsrEventTimeStamp
•
qsrEventSeverity
VP group notifications are sent for the following events:
•
Change in name of a VP group
•
Enabling and disabling a VP group
Sensor notification
The sensor notification indicates that the state for the specified sensor is not normal. When the
sensor returns to the normal state, this event is sent with the qsrEventSeverity object set to
clear
.
qsrSensorNotification uses the following objects:
•
qsrSensorValue
•
qsrSensorState
Notifications 213