HP MPX200 Multifunction Router - Manual (Page 172)

Set features
Applies license keys to the router. The date and time must be set on the router before applying a
new key.
Admin session Authority
set features Syntax
Set iSCSI
Configures an iSCSI port.
Admin session Authority
[<PORT_NUM>] set
iscsi
Syntax
The number of the iSCSI port to be configured. [<PORT_NUM>] Keywords
Example:
MPX200 <1>(admin) #> set iscsi 1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both ports.
Configuring iSCSI Port: 1
---------------------------
Port Status (0=Enable, 1=Disable) [Enabled ]
Port Speed (0=Auto, 1=100Mb, 2=1Gb) [Auto ]
MTU Size (0=Normal, 1=Jumbo, 2=Other) [Normal ]
Window Size (Min=8124B, Max=1048576B) [65536 ]
IPv4 Address [10.3.5.205 ]
IPv4 Subnet Mask [255.255.255.0 ]
IPv4 Gateway Address [0.0.0.0 ]
IPv4 TCP Port No. (Min=1024, Max=65535) [3260 ]
IPv4 VLAN (0=Enable, 1=Disable) [Disabled ]
IPv6 Address 1 [:: ]
IPv6 Address 2 [:: ]
IPv6 Default Router [:: ]
IPv6 TCP Port No. (Min=1024, Max=65535) [3260 ]
IPv6 VLAN (0=Enable, 1=Disable) [Disabled ]
iSCSI Header Digests (0=Enable, 1=Disable) [Disabled ]
iSCSI Data Digests (0=Enable, 1=Disable) [Disabled ]
All attribute values for Port 1 that have been changed will now be saved.
Set iSNS
Configures the blade iSNS parameters.
Admin session Authority
set isns Syntax
Example:
MPX200 <2>(admin) #> set isns
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
172 Command reference