beautypg.com

Setting up the iscsi ip ports – HP MPX200 Multifunction Router User Manual

Page 34

background image

In the IPv4 or IPv6 box, select Static and set the management port IP address.

Figure 22 iSCSI controller properties: Mgmt Port tab

Setting up the iSCSI IP ports

Each iSCSI IP port must have an IP address—IPv4, IPv6, or both. Set the IP address on the IP Ports
tab on the iSCSI Controller Properties page (see

Figure 23 (page 35)

).

NOTE:

A target portal is created for each IP address that you set.

34

Managing MPX200 iSCSI using HP P6000 Command View