HP MPX200 Multifunction Router - Manual (Page 181)

50:06:01:60:3a:60:0a:63 7/VPGROUP_2
50:06:01:60:3a:60:0a:63 8/VPGROUP_2
Show iSCSI
Displays iSCSI information for the specified port. If you do not specify a port, the command displays
all ports.
None Authority
[port_num] show
iscsi
Syntax
The number of the iSCSI port. [port_num] Keywords
Example:
MPX200 <1>(admin) #> show iscsi
iSCSI Port Information
------------------------
iSCSI Port GE1
Port Status Enabled
Link Status Up
iSCSI Name iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.0
Firmware Revision 3.00.01.57
Current Port Speed 1Gb/FDX
Programmed Port Speed Auto
MTU Size Jumbo
Window Size 32768
MAC Address 00-c0-dd-13-16-44
IPv4 Address 33.33.50.96
IPv4 Subnet Mask 255.255.0.0
IPv4 Gateway Address 0.0.0.0
IPv4 Target TCP Port No. 3260
IPv4 VLAN Disabled
IPv6 Address 1 2000:33::37:96:1
IPv6 Address 2 ::
IPv6 Link Local fe80::2c0:ddff:fe13:1644
IPv6 Default Router ::
IPv6 Target TCP Port No. 0
IPv6 VLAN Disabled
iSCSI Max First Burst 65536
iSCSI Max Burst 262144
iSCSI Header Digests Disabled
iSCSI Data Digests Disabled
Show iSNS
Displays iSNS configuration information for the specified iSCSI port. If you do not specify a port,
the command displays iSNS configuration information for all iSCSI ports.
None Authority
[port_num] show
isns
Syntax
The number of the iSCSI port. [port_num] Keywords
Example:
MPX200 <2>(admin) #> show isns
iSNS Information
----------------
iSNS Disabled
Commands 181