beautypg.com

Code load – HP MPX200 Multifunction Router User Manual

Page 36

background image

Figure 24 Set iSCSI controller time

Code load

NOTE:

HP recommends that you load the latest MPX200 firmware. See

http://www.hp.com/

go/hpsc

for updates.

You load the firmware from the P6000 Command View Code Load page for the iSCSI controller.
Firmware is loaded for the selected controller only; for a dual-blade configuration, you must perform
this procedure for each blade.
1.

Select the desired iSCSI controller.

2.

Click Code Load.

3.

Browse to the firmware file.

4.

Click Next Step.

5.

Click Finish.

6.

In the dialog box, enter yes, and then click Update.

The MPX200 reboots upon successful load of the firmware.

36

Managing MPX200 iSCSI using HP P6000 Command View

See also other documents in the category HP Storage: