HP MPX200 Multifunction Router - Manual (Page 177)

Displays licensed features. See “show features
command” (page 180) .
features
Displays initiator information for iSCSI or FC. See “show
initiators command” (page 180) .
initiators [fc or iscsi]
Displays initiators and the LUNs to which they are
mapped. See
“show initiators LUN mask
command” (page 180) .
initiators_lunmask
Displays iSCSI port and configuration information. See
“show iSCSI command” (page 181) .
iscsi [port_num]
Displays the router’s iSCSI name server (iSNS)
configuration. See
“show iSNS command” (page 181) .
isns [port_num]
Displays the router’s logging information. See “show
logs command” (page 182) .
logs [last_x_entries]
Displays detailed LUN information for a specified target
and LUN. See
“show LUNinfo command” (page 182) .
luninfo
Displays LUN mappings. See “show lunmask
command” (page 183) .
lunmask
Displays information about LUNs and their targets. See
“show LUNs command” (page 183) .
luns
Displays memory usage. See “show memory
command” (page 184) .
memory
Displays the router’s management port (10/100)
configuration. See
“show mgmt command” (page 184) .
mgmt
Displays the router’s NTP configuration. See “show NTP
command” (page 184) .
ntp
Displays information about the router performance. See
“show perf command” (page 185) .
perf [ byte | init_rbyte |
init_wbyte | tgt_rbyte | tgt_wbyte
]
Displays the targets presented by the router: FC, iSCSI,
or both. See
“show presented targets
command” (page 186) .
presented_targets [fc or iscsi]
Displays the router properties. See “show properties
command” (page 187) .
properties
Displays the router’s SNMP properties and trap
configurations. See
“show SNMP command” (page 187) .
snmp
Displays the router FC and iSCSI statistics. See “show
stats command” (page 187) .
stats
Displays router product information, including the serial
number, software version, hardware version, system
configuration, and temperature. See “show system
command” (page 190) .
Displays the targets discovered by the router: FC, iSCSI,
or both. See
“show targets command” (page 190) .
targets [fc or iscsi]
Displays the VPGs. See “show VPGroups
command” (page 191) .
vpgroups [vpgroup index]
Commands 177