HP MPX200 Multifunction Router - Manual (Page 49)

1. To properly setup LUN masking, create a group that includes the WWNs from a single VPG.
To identify which WWNs belong to a VPG see the fourth bit (circled in Figure 46 (page 49) ).
You can create up to four groups, each containing WWNs from each VPG from each MPX200
blade. LUNs can be created and assigned to the groups at this time.
Figure 46 LUN management window
2. Install the Microsoft iSCSI Initiator software. For Windows Server 2008, the iSCSI initiator is
included with the operating system.
For Windows Server 2003, you must install the iSCSI initiator. For Windows Server 2003,
the Microsoft iSCSI initiator installation presents an option for installing MPIO using the
Microsoft generic DSM (Microsoft MPIO Multipathing Support for iSCSI check box). For
Windows Server 2008, MPIO is installed separately as a feature.
3. See “Setting up the iSCSI initiator” (page 58) to set up the Windows host and register the
IQN name.
4. Install and run the mpx Manager.
5. Start the Presentation Wizard by selecting Wizards from the menu.
The LUN Presentation Wizard will display the XP target ports (see Figure 47 (page 50) ).
LUN management 49