HP MPX200 Multifunction Router - Manual (Page 29)

5. Route the power cord:
a.
Starting from the front of the rack, connect the power cord to the MPX200.
b. For the left blade, route the cord by following the gap between the chassis and the chassis
rail (see
Figure 16 (page 29) ).
c. Repeat for the right blade.
NOTE: The right blade requires the power cord to extend approximately 30 cm (12
inches) beyond the front edge, due to the positioning of the socket on the PCM.
Figure 16 Power cord
26591b
1
1. Power cord
Rack mounting the MPX200 29