HP MPX200 Multifunction Router - Manual (Page 194)

........
Wan link test initialization completed successfully
Example 3:
The following example illustrates the use of the wanlinktest show command.
MPX200 <1>(admin) #> wanlinktest show
Not completed single iteration yet
Wan link test started for the duration of 10 Minutes at on GigePort 1
LocalIP: 66.66.1.120 RemoteIP: 66.66.1.90
Active Iterations.... Press Control+C to quit command
StartTime EndTime RTT TCP BW UDP BW Jitter PktDrop%
--------- --------- --- ----- ----- ------ --------
14:29-Jun/04/2012 14:34-Jun/04/2012 <0.1ms 948Mb 949Mb <0.1ms 0.000%
14:34-Jun/04/2012 14:39-Jun/04/2012 <0.1ms 952Mb 951Mb <0.1ms 0.000%
Done With WAN Link Test
Wan link test started for the duration of 10 Minutes at 14:28-Jun/04/2012 on GigePort 1
LocalIP: 66.66.1.120 RemoteIP: 66.66.1.90
Average So Far
StartTime EndTime RTT TCP BW UDP BW Jitter PktDrop%
--------- --------- --- ----- ----- ------ --------
14:28-Jun/04/2012 14:39-Jun/04/2012 <0.1ms 950Mb 950Mb <0.1ms 0.000%
You can ftp wan_link_test_results.stats file to get overall statistics information
Done With WAN Link Test
MPX200 <1> (admin) #>
Example 4:
The following example illustrates the use of the wanlinktest show command on a WAN link
test server.
MPX200 <1>(admin) #> wanlinktest show
Wanlinktest server is listening on interface 1.1.1.1 socket port 3260
Example 5:
The following example illustrates the use of the wanlinktest stop command.
MPX200 <1>(admin) #> wanlinktest stop
Stopping the test
Wan Link Test stopped successfully
194 Command reference