HP MPX200 Multifunction Router - Manual (Page 165)

1 VPGROUP_1
2 VPGROUP_2
3 VPGROUP_3
4 VPGROUP_4
Multiple VpGroups are currently 'ENABLED'.
Please select a VpGroup from the list above ('q' to quit): 1
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 50:06:01:60:c1:e0:0d:a2,50:06:01:60:41:e0:0d:a2
1 50:06:01:60:c1:e0:0d:a2,50:06:01:68:41:e0:0d:a2
Please select a Target from the list above ('q' to quit): 0
Index (LUN/VpGroup) Vendor
----- ------------- ------
1 1/VPGROUP_1 DGC
2 2/VPGROUP_1 DGC
3 3/VPGROUP_1 DGC
Please select a LUN to present to the initiator ('q' to quit): 1
All attribute values that have been changed will now be saved.
Example 3: The following example shows the lunmask rm command:
MPX200 <1> (admin) #> lunmask rm
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 20:00:00:20:37:fd:8b:ab,22:00:00:20:37:fd:8b:ab
1 20:00:00:20:37:fd:8a:b0,22:00:00:20:37:fd:8a:b0
2 20:00:00:20:37:fd:9c:f7,22:00:00:20:37:fd:9c:f7
3 20:00:00:20:37:fd:8d:00,22:00:00:20:37:fd:8d:00
Please select a Target from the list above ('q' to quit): 0
LUN WWULN Vendor
---- ---------- --------
0 20:00:00:20:37:fd:8b:ab:00:00:00:00:fc:b6:1f:fa SEAGATE
Please select a LUN from the list above ('q' to quit): 0
Index Initiator
----- -----------------
0 iqn.1991-05.com.microsoft:server1
Please select an Initiator to remove ('a' to remove all, 'q' to quit): 0
All attribute values that have been changed will now be saved.
Example 4: The following example shows the lunmask rm command with VPGs:
MPX200 <1> (admin) #> lunmask remove
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 50:06:01:60:c1:e0:0d:a2,50:06:01:60:41:e0:0d:a2
1 50:06:01:60:c1:e0:0d:a2,50:06:01:68:41:e0:0d:a2
Please select a Target from the list above ('q' to quit): 0
Index (LUN/VpGroup) Vendor
----- ------------- ------
0 0/VPGROUP_1 DGC
1 1/VPGROUP_1 DGC
2 2/VPGROUP_1 DGC
3 3/VPGROUP_1 DGC
4 0/VPGROUP_2 DGC
Please select a LUN from the list above ('q' to quit): 0
Index Initiator
----- -----------------
0 iqn.1991-05.com.microsoft:server1
Please select an Initiator to remove ('a' to remove all, 'q' to quit): 0
All attribute values that have been changed will now be saved.
MPX200 <1> (admin) #>
Commands 165