HP MPX200 Multifunction Router - Manual (Page 135)

3. Create an FCoE zone. Zone the WWNN from the MPX200 FCoE port from each blade and
the host CNA. If multiple fabrics exist, create zones where redundancy requires it. There are
two ways to identify the FCoE ports on the MPX200:
•
In HP P6000 Command View, click the FC Ports tab of the iSCSI Controller 0X in the
Hardware folder (see
Figure 112 (page 135) ).
•
In the CLI, issue the show fc command (see Figure 113 (page 136) ).
Figure 112 HP Command View FCoE ports
Setting up for FCoE connectivity to HP P6000 EVAs 135