HP Access Control - Manual (Page 49)

NOTE: You can only create one server configuration.
If the email server configuration has been defined, it will appear on your screen with its SMTP outgoing mail
and port number. You will be able to create, modify, and delete your server configuration by using the task
bar at the top of the page.
5.21.1 Configure the server
To configure the server, complete the following steps:
1. Click Configure the email server.
At Modify the server configuration,
a.
Enter the Outgoing mail (SMTP) information.
b. Enter the Outgoing port number (SMTP).
c. Enter the User name and Password. This user name and password allows you to validate access to
the email server.
d. If a Domain is required, enter the NETBIOS Domain name.
Figure 5-26 Modify server configuration
2. Click the Go icon to accept the configuration, or the Cancel icon to stop the operation.
NOTE: All configuration fields can contain up to 127 characters, symbols, and figures.
5.21.2 Modify the server configuration
To modify the server configuration, complete the following steps:
Section 5.21 Configuring the email server 35