Brocade Virtual ADX Server Load Balancing Guide (Supporting ADX v03.1.00) User Manual
Page 394
378
Brocade Virtual ADX Server Load Balancing Guide
53-1003247-01
Displaying virtual server information and statistics
B
ACL ID
Displays the ID of the Access Control List (ACL) policy bound to the
virtual server
Predictor
The load balancing predictor the Brocade Virtual ADX uses to balance traffic among the
real servers bound to this virtual server. The predictor can be one of the following:
•
least-conn
•
round-robin
•
weighted-round-robin
•
weighted
•
enhanced-weighted
You can assign these metrics on a global basis and an individual virtual server basis.
For more information, refer to
To change the predictor (globally or locally), refer to
Tot-Conn
The number of client connections on the server since the Brocade Virtual ADX was last
booted or restarted. A connection consists of two sessions, the client-to-server session
and the server-to-client session.
VIP state
Displays the health of the virtual server. The health status can be
one of the following:
•
Healthy — Indicates the virtual server is healthy.
•
Not healthy — Indicates the virtual server is not healthy.
Rx Pkts
Displays the total number of packets received by the virtual server.
Rx bytes
Displays the total number of bytes received by the virtual server.
Rx PPS
Displays the total number of packets per second received by the virtual server.
Rx throughput
The rate of throughput received in Kbps.
Tx Pkts
Displays the total number of packets transmitted by the virtual server.
Tx bytes
Displays the total number of bytes transmitted by the virtual server.
Tx PPS
Displays the total number of packets per second transmitted by the virtual server.
Tx throughput
The rate of throughput transmitted in Kbps.
tcp-conn-rate
The TCP connection rate.
udp-conn-rate
The UDP connection rate.
CPS
The connection rate measured in seconds.
CurrConn
Displays the number of current open connections on the virtual server.
TABLE 43
Virtual server information (Continued)
Field
Description