Brocade Virtual ADX Server Load Balancing Guide (Supporting ADX v03.1.00) - Manual (Page 356)

340 Brocade Virtual ADX Server Load Balancing Guide
53-1003247-01
Configuring SIP SLB
7
Show commands for displaying SIP sessions
NOTE
The show sip session command does not count SIP sessions. Use the show sip server command to
display SIP-related real server information.
• “Showing sip session info”
• “show sip server”
Showing sip session info
Use the show sip session info command to display information on SIP session usage.
Virtual ADX#show sip session info
Syntax: show sip session info
Virtual ADX#show sip session info
slot-9 cup-1 Avail. SIP Ses = 0 total Sip Sessi= 0
Show sip server
Use the show sip server command to display real server-related information.
Virtual ADX#show sip server
Syntax: show sip server
Debug commands
The following commands and the counters they display are useful for internal debugging purposes.
Showing various SIP counters
Virtual ADX#show sip server
Avail. SIP sessions = 0 Total SIP sessions = 500000
Server State - 0: disabled, 1:enabled, 2:failed, 3:test, 4:suspect, 5:grace_dn,
6:active
Real Server St CurrConn TotConn CurrSess PeakConn
r31 6 28723 344489 28723 91687
r32 6 28722 344505 28722 91632
r33 6 28722 344549 28722 91951
r34 6 28722 344596 28722 91566
r35 6 28723 344702 28723 91870
Virtual ADX#show sip debug parser
SIP Parser Counters:
PARSER ERR :1 PARSER PKT CORRUPT :4
PARSER MEM ALLOC ERR :0 PARSER MULTI CALLID :0
PARSER ABNORMAL HDR END :0 PARSER PKT HDR TOO LONG :8
PARSER UNKNOWN PKT :21 PARSER CONTENT TOO LONG :0
PARSER CSEQ NOT FOUND :1 PARSER PACKET MALFORMED :0