Brocade Virtual ADX Server Load Balancing Guide (Supporting ADX v03.1.00) - Manual (Page 363)

Brocade Virtual ADX Server Load Balancing Guide 347
53-1003247-01
VLAN and tagging definitions
8
VLAN and tagging definitions
Virtual ADX(config)#vlan 1 name DEFAULT-VLAN by port
Virtual ADX(config-vlan-1)#exit
Virtual ADX(config)#vlan 110 by port
Virtual ADX(config-vlan-10)#tagged ethe 1 to 2
Virtual ADX(config-vlan-10)#untagged ethe 3
Virtual ADX(config-vlan-10)#router-interface ve 10
Virtual ADX(config-vlan-10)#exit
Miscellaneous
Virtual ADX(config)#aaa authentication web-server default local
Virtual ADX(config)#no enable aaa console
Virtual ADX(config)#exit
Virtual ADX(config)#telnet server
Virtual ADX(config)#username admin password .....
Virtual ADX(config)#snmp-server
Saving the configuration
Virtual ADX(config)#write memory
The IPv6 and IPv4 service definitions can co-exist on the same system.You can define IPv4 VIPs
with IPv4 real servers and IPv6 VIPs with IPv6 real servers on the same system.
IPv6 configuration example
An example configuration and SLB session output is shown below.
Example Configuration
!
server source-nat
server source-nat-ip 2001:db8:2::20 120 :: port-range 1
!
server real rs1 2001:db8:2::4
port http
port http url “HEAD /”
!
server virtual vs1 2001:db8:1::10
port http
bind http rs1 http
!
interface ethernet 1
ipv6 address 2001:db8:1::1/120
!
interface ethernet 2
ipv6 address 2001:db8:2::1/120