Brocade Virtual ADX Server Load Balancing Guide (Supporting ADX v03.1.00) - Manual (Page 371)

Brocade Virtual ADX Server Load Balancing Guide 355
53-1003247-01
Appendix
B
SLB Show and Debug Commands
Using show source-ip source ip [ real-server ip | all]
The show source-ip source-ip command displays the IP information, free ports, owner, start, and
end for port pools for a specific source IP.
The show source-ip source ip real-server-ip command displays the free ports, owner, start, and end
for port pools for the specified source IP addresses and real server.
The show source-ip source ip all command all displays the free ports, owner, start, and end for port
pools for the specified source IP addresses for all real servers.
Virtual ADX#show source-ip source ip [real-server ip | all]
Example
NOTE
If the show source-ip command displays that the IP is a per-real-srcip, then you should use the show
source-ip source-ipreal-server ip command to view the port allocation and usage information,
because the port allocation will be from the real server pool.
Virtual ADX#show source-ip 10.4.4.101 all
Source IP information
*********************
Source IP: 10.4.4.101
flt: Yes standby: No intf ip: No
Real server: real-rs-8.10 (10.8.8.10)
MMS: h: 0 t: 0 m: 23b4fb3c T: 642 f: 642
RTSP: h: 0 t: 0 m: 23b51b54 T: 384 f: 384
NORM: h: 0 t: 0 m: 23b34b24 T: 9216 f: 9216
Real server: real-rs-8.11 (10.8.8.11)
MMS: h: 0 t: 0 m: 23b53b6c T: 642 f: 642
RTSP: h: 0 t: 0 m: 23b55b84 T: 384 f: 384
NORM: h: 0 t: 0 m: 280c1d08 T: 9216 f: 9216
Real server: real-rs-8.12 (10.8.8.12)
MMS: h: 0 t: 0 m: 23b58114 T: 642 f: 642
RTSP: h: 0 t: 0 m: 23b5a12c T: 384 f: 384
NORM: h: 0 t: 0 m: 280dcd20 T: 9216 f: 9216