Yokogawa µR20000 - Manual (Page 86)

3-17
IM 04P02B01-01E
Names
of
Parts
and
Run
Operat
ons
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
3.11 Resettng the Report Data of the Perodc
Prntout
This operation resets the past report data when the recorder is configured to print the
report data (the average, the minimum, the maximum, or the sum) of the measured
values in periodic printout.
Procedure
Resettng the Report Data
1. Press the FUNC key.
2. Press the key to select Perodc and then press the key.
Func=Periodic
3. Press the key to select Reset and then press the key.
The report data is reset, and the calculation of the report data starts again from that point.
The screen returns to the data display screen.
Log data=Reset
* When the key or key is pressed while holding down the SHIFT key, the operation is reversed as
when the respective key is pressed by itself.