7 turning printouts on/off, 7 turnng prntouts on/off – Yokogawa µR20000 User Manual

Page 147

IM 04P02B01-01E

7-10

7.7 Turnng Prntouts ON/OFF

(Selectng the Channel/Tag Prntout and Turnng ON/OFF the Channel No.,

Alarm, Recordng Start, New Chart Speed, Scale, and Pen Color Prntouts)

This section explains the details of turning ON/OFF the printouts of various items.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).

Procedure

Changng the Settngs

Hold down the

MENU

key for 3 seconds to enter Setting mode.

Hold down the

and

keys simultaneously for 3 seconds to enter Basic

Setting mode.

Press the

key or

SHIFT +

key to select

Prnt and then press the key.

Set each item and press the key.

Use the

key or

SHIFT +

key to select values.

For the procedure on how to enter values or characters, see section 4.2.
If you press the

ESC key in the middle of the operation, the settings entered up to

then are cancelled, and the display returns to a higher level menu.

When the

Settng complete screen appears, do either of the following:

To correct the setting, press the key.
If you are done, press the

ESC key.

Select whether to print the channel

number beside the trend recording.

Select whether to use the channel

number or tags for the printout.

Select whether to print the alarm

occurrence/release.

Select On to enable recording start

printout.

Select On to print when the chart

speed is changed.

Select On to print the channel scale in

periodic printout.

Select On to print the pen color in

periodic printout.

The new setting takes effect.

ESC/?

(Dot model)

(Pen model)

Printout

Setting complete

Basic=Print

CH/Tag=Channel

Alarm=On1

Channel=On

Record On=Off

Chart speed=On

Scale=On

Pen color=On