Yokogawa µR20000 User Manual

Page 177

IM 04P02B01-01E

7-40

7.24 Enablng Start Prntout, End prntout, and

Message Format (/BT1 Opton)

This section explains the details of enabling/disabling the Start printout, End printout, and
Message format.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).

Procedure

Changng the Settngs

Hold down the

MENU

key for 3 seconds to enter Setting mode.

Hold down the

and

keys simultaneously for 3 seconds to enter Basic

Setting mode.

Press the

key or

SHIFT +

key to select

Batch and then press the

key.

Set each item and press the key.

Use the

key or

SHIFT +

key to select values.

For the procedure on how to enter values or characters, see section 4.2.
If you press the

ESC key in the middle of the operation, the settings entered up to

then are cancelled, and the display returns to a higher level menu.

When the

Settng complete screen appears, do either of the following:

To correct the setting the key.
If you are done, press the

ESC key.

Basic=Batch

Dual comment=Use

Basic batch

Setting complete

Enable/disable the Start printout and

End printout function.

Select 4 or 6 digits for the number of

digits in the lot number, or disable.

Select to enable or disable Start

printout 2 and End printout 2.

The new setting takes effect.

MSG format=Use

Enable/disable the message format

function.

ESC/?

Batch=Use

(Only when batch is set to Use)

Lot No.=4

Applyng the Changes and Returnng to Operaton Mode

Press the

key or

SHIFT +

key to select

End and then press the key. Press

the

key to select

Store and then press the key. The changes are applied, and

the screen returns to Operation mode. If you select

Abort and press the key, the

changes are discarded, and the screen returns to Operation mode. Press the

ESC key to

return to the

Basc= screen.