Yokogawa µR20000 - Manual (Page 184)

9-1
IM 04P02B01-01E
Operat
ons
Related
to
the
Computat
on
Funct
on
(/M1
Opt
on)
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
9.1 Startng/Stoppng/Resettng the Computaton
This section explains the details of starting/stopping the computation and resetting the
computed values of computation channels.
Procedure
Startng the Computaton
1. Press the FUNC key.
2. Press the key to show Math and then press the key.
3. Press the key with Start shown on the screen.
The computation starts, and the screen switches to the data display screen.
The word MATH in the status display comes on.
Math=Start
Stoppng the Computaton
1. Press the FUNC key.
2. Press the key to show Math and then press the key.
3. Press the key with Stop shown on the screen.
The computation stops, and the screen switches to the data display screen.
The word MATH in the status display clears.
Math=Stop
Resettng the Computed Values of All Computaton Channels to 0
This operation can be executed only when the computation is stopped.
1. Press the FUNC key.
2. Press the key to show Math and then press the key.
3. Press the key to show Reset and then press the key.
The computed values of all computation channels are reset, and the screen switches to the
data display screen.
Math=Reset
Chapter 9 Operatons Related to the Computaton Functon (/M1 Opton)
* When the key or key is pressed while holding down the SHIFT key, the operation is reversed as
when the respective key is pressed by itself.