Yokogawa µR20000 - Manual (Page 239)

12-11
IM 04P02B01-01E
Spec
fcat
ons
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
Name Description
Tag Alarm Value Unit Unit with 5 or 6 digits
Unit with 4, 5, or 6 digits
Measurement
channel
Measurement channel
Computation channel
Measurement channel
Measurement channel
Computation
channel
Computation channel
Computation channel
Tag_1CH digital display
Tag_2CH digital display
Tag_1CH digital + 1CH
bargraph display
Tag_1CH digital + 4CH
bargraph display (Pen model)
DI/DO display
Status display
System display
Lights out
Displays the appropriate
mark.
No display.
The displayed contents switches
every three sconds.
Alarm Chart end
Flag display
Channel alarm status display
Time/chart speed display
Measurement channels 1 to 24
Computation channels 0A to 1P
DI: Remote control inputs
(/R1 option)
DO: Alarm output relays
(/Ax option)
Date, time, and chart speed
See the next page.
The date display format can be changed on the Basic Setting mode.
Flag and scale
• Alarm is not set.
– Alarm is not occurring.
Channel number Alarm is occurring.
:123456 789
012 345678 901234
:ABCDEF GJKMNP
ABCDEF GJKMNP
. . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . .
Aug.31.2005 11:26:37 12000mn/h
180mm Dot model
Analog:24 Math:24
TI00001dH-1999.9ABCDE
TI00002H9999999.9ABCDE
TI00001dH-1999.9ABCDE
TI00002H9999999.9ABCDE
ABC
DEF
: OFF : ON
Batch name display
Batch No.-000001
Multiple display
Display in which different screens are assigned to the top and bottom sections.
01dH-1999.9ABCDEf
Aug.31.2005 11:26:37 12000mn/h
TI00001dH-1999.9ABCD
TI00001dH-1999.9ABCD
ABC
DEF
TI00002H9999999.9ABC
TI00002H9999999.9ABC
Measurement channels
Channel: 7 digits, mode: 1 digit, alarm: 1 digit, value: 7 digits, unit: 4 digits
Computation channels
Channel: 7 digits, alarm: 1 digit, value: 9 digits, unit: 3 digits
Measurement channels
Channel: 7 digits, mode: 1 digit, alarm: 1 digit, value: 7 digits, unit: 6 digits
Computation channels
Channel: 7 digits, alarm: 1 digit, value: 9 digits, unit: 6 digits
Mode: Displays “d” on channels “Delta computation” is set.
Batch number Lot number
Automatically added when batch number and lot number are enabled.
Bar graphs are assigned channels 1 to 4 from the top.
Uses the same digital display format as “2CH digital display (Tag display).”
Value and bar graph of the same channel.
Uses the same digital display format as “1CH digital display (Tag display).”
• Product information: Number of signal inputs, options installed, number of computation
channels, MAC address, and recorder version (firmware version)
• Setup data: Periodic printout interval, dot printing interval (dot model), and pen
offset compensation On/Off (pen model)
12.4 Dsplay Functon Specfcatons