Yokogawa µR20000 User Manual
Page 104
5-3
IM 04P02B01-01E
Frequently
Used
Setup
Operat
ons
(Sett
ng
Mode)
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
Lnear Scalng
Select Scale.
Set the channel range.
Select Volt, TC, RTD, or DI.
Select the range type.
Set the left span value.
Set the right span value.
Set the decimal position and left scale
value.
Set the right scale value.
The new setting takes effect.
ESC/?
Set=Range
CH=01-01
Mode=Scale
Type=Volt
Range=2V
Span left= -2.000
Span right= 2.000
Scale left= 0.00
Scale right= 200.00
01-01 Channel
Setting complete
First channel
Last channel
Descrpton
• Scale Left, Scale Rght, and Decmal Poston
Selectable range (mantissa): –20000 to 30000
Example: The value in the range of –100.00 to 350.00 cannot be specified. The
mantissa of scale right is 35000, which exceeds the upper limit of 30000.
Set in the range of –100.0 to 350.0.
Decimal position: XXXXX, XXXX.X, XXX.XX, XX.XXX, X.XXXX
The decimal position is the position specified by scale left.
Example: Change 0.00 to 0.0.
Press the
key to move the cursor to the last digit of 0.00.
Space
Press the key to change the value to 0.0 .
Note
The displayable/printable range of scale values is –19999 to 30000 excluding the decimal.
5.1 Settng the Input Range