5 starting/stopping the recording, 5 starting/stopping the recording -11, 5 startng/stoppng the recordng – Yokogawa µR20000 User Manual
Page 80
3-11
IM 04P02B01-01E
Names
of
Parts
and
Run
Operat
ons
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
3.5 Startng/Stoppng the Recordng
This section describes the procedures for starting/stopping the chart feed and checking
the recorded result.
Procedure
Startng the Recordng
Press the
RCD
key to start the chart feed.
The status display shows the word “RECORD.”
Note
For models with the FAIL/chart end detection and output function (/F1 option), the chart feed
will not start even when pressing the RCD key if the chart paper is empty or almost out. Insert
new chart paper before pressing the RCD key.
Stoppng the Recordng
While recording is in progress, press the
RCD
key to stop the chart feed.
The word “RECORD” on the status display clears.
Feedng the Chart Paper
The chart paper is fed while the
FEED
key is held down.
Vewng the Recorded Results
Pull the front cover tab of the chart cassette to open the front cover. The recorded chart
paper can be pulled out for viewing.
Front cover tab (left and right)
Recorded chart paper can be pulled out.