20 selecting to show/hide the func key menus, 20 selecting to show/hide the func key menus -31, 20 selectng to show/hde the func key menus – Yokogawa µR20000 User Manual

Page 168

7-31

IM 04P02B01-01E

Setup

Operat

ons
for

Chang

ng/Add

Funct

ons
(Bas
c

Sett
ng

Mode)

App

Index

7.20 Selectng to Show/Hde the FUNC Key Menus

Select the menu for showing/hiding the FUNC key menus. This function is available on
version 1.31 or later.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).

Procedure

Changng the Settngs

Hold down the

MENU

key for 3 seconds to enter Setting mode.

Hold down the

and

keys simultaneously for 3 seconds to enter Basic

Setting mode.

Press the

key or

SHIFT +

key to select

Select menu and then press the

key.

Press the key with

Functon shown on the screen.

Set each item and press the key.

Use the

key or

SHIFT +

key to select values.

For the procedure on how to enter values or characters, see section 4.2.
If you press the

ESC key in the middle of the operation, the settings entered up to

then are cancelled, and the display returns to a higher level menu.

When the

Settng complete screen appears, do either of the following:

To correct the setting the key.
If you are done, press the

ESC key.

Basic=Select menu

Manual print=On

Select whether to display Manual

print. Select On or Off.

Menu=Function

Select func menu

Setting complete

Setup list=On

Select whether to display Setup list.

Select On or Off.

The new setting takes effect.

Message=On

Select whether to display Message.

Select On or Off.

Buffer clear=On

Select whether to display Buffer

clear. Select On or Off.

Periodic=On

Select whether to display Periodic.

Select On or Off.

ESC/?