6 general specifications, 6 general specifications -18, 6 general specfcatons – Yokogawa µR20000 User Manual
Page 246: Constructon, Normal operatng condtons, Power supply
IM 04P02B01-01E
12-18
12.6 General Specfcatons
Constructon
Item
Specfcatons
Mounting
Flush panel mounting (on a vertical plane)
Mounting angle
Inclined backward up to 30 degrees from a horizontal plane.
Allowable panel thickness 2 to 26 mm
Material
Case: drawn steel
Front door: Aluminum die-cast
Color
Case: Charcoal gray light (Munsell 10B3.6/0.3 or equivalent)
Front door: Charcoal gray light (Munsell 10B3.6/0.3 or equivalent)
Front panel
Water and dust-proof (complies with DIN40050-IP54)
Dimensions
288(W) × 288(H) × 220(D) mm (D: depth from the panel mounting plane)
Weight
1-pen: approx. 7.8 kg, 2-pen: approx. 7.8 kg, 3-pen: approx. 7.9 kg, 4-pen: approx. 7.9 kg
6-dot: approx. 8.4 kg, 12-dot: approx. 8.6 kg, 18-dot: approx. 8.8 kg, 24-dot: approx. 9.0 kg
Normal Operatng Condtons
Item
Specfcatons
Ambient temperature
0 to 50°C
Ambient humidity
20 to 80%RH (at 5 to 40°C)
Allowable power supply voltage range
90 to 132, 180 to 264 VAC
Power supply frequency
50 Hz ±2%, 60 Hz ±2%
Vibration
10 to 60 Hz 0.2 m/s
2
or less
Shock
Not acceptable.
Magnetic field
400 A/m or less (DC and 50/60 Hz)
Noise
Normal mode (50/60 Hz)
Volt: The peak value including the signal must be less than 1.2 times the rated value of the range
(Example: 2 V for 2 V range).
TC:
The peak value including the signal must be less than 1.2 times the rated value of the range.
RTD: 50 mV or less
Common mode noise (50/60 Hz): 250 VACrms or less for all ranges
Maximum noise voltage between channels (50/60 Hz): 250 VACrms or less. 6-dot model with the 3
legs isolated RTD (/N2 option) installed: 200 VACrms or less.
Mounting position
Up to 30° of backward tilt angle allowed, no tilt to the left or right
Warm-up time
At least 30 minutes after power on
Altitude
2000 m or less above sea level
Power Supply
Item
Specfcatons
Rated supply voltage
100 to 240 VAC
Allowable power supply voltage range
90 to 132, 180 to 264 VAC
Rated power supply frequency
50 Hz, 60 Hz
Rated power
Pen model: 55 VA, dot model: 55 VA
Power consumption
Model
100 VAC
240 VAC
Maxmum
1- to 4-pen model
Approx. 17 VA*
Approx. 25 VA*
Approx. 55 VA
6- to 24-dot model
Approx. 17 VA*
Approx. 23 VA*
Approx. 55 VA
* When balanced