Yokogawa µR20000 User Manual
Page 171
IM 04P02B01-01E
7-34
Select set menu
Setting complete
The new setting takes effect.
From the previous page
(/BT1 option)
(/BT1 option)
Batch name=On
Select whether to display Batch No.
and Lot No. in Setting mode. Select
On or Off.
Batch detail=On
Select whether to display Batch
detail in Setting mode. Select On
or Off.
ESC/?
Calibration=On
Select whether to display
Calibration in Setting mode.
Select On or Off.
Math=On
Select whether to display Math in
Setting mode. Select On or Off.
(/M1 option)
(/CC1 option)
Applyng the Changes and Returnng to Operaton Mode
Press the
key or
SHIFT +
key to select
End and then press the key. Press
the
key to select
Store and then press the key. The changes are applied, and
the screen returns to Operation mode. If you select
Abort and press the key, the
changes are discarded, and the screen returns to Operation mode. Press the
ESC key to
return to the
Basc= screen.
Explanaton
On: Display the menu in Setting mode.
Off: Do not display the menu in Setting mode when Customized Menu is enabled.
7.21 Selectng to Show/Hde Settng Mode Menus